🎯 Lesson: Removing Supports

🧠 Focus: Learn how to safely and cleanly remove supports from FDM and resin prints without damaging your model or affecting print quality.

✅ Lesson Summary

Support removal is often the first post-processing step after a 3D print is complete. Whether you’re working with FDM or resin prints, knowing how to properly remove support structures is crucial for preserving fine details and ensuring a smooth finish. This lesson covers tools, techniques, safety tips, and methods to minimize scarring or breakage.

🎓 Learning Objectives

By the end of this lesson, students will be able to:

• Identify different types of support structures

• Use proper tools and techniques to remove supports safely

• Minimize scarring and surface damage

• Understand slicer settings that improve support removal

• Apply tips for handling resin-printed models during support cleanup

📘 Lesson Content

🟩 1. Types of Supports

📌 Tip: Choose tree/organic supports when possible to reduce marks and improve ease of removal.

🟨 2. FDM Support Removal Tools

Recommended tools:

• Flush cutters or side snips

• Hobby knife or scalpel

• Needle-nose pliers

• Sandpaper or deburring tools

• Heat gun or hair dryer (to soften and flex plastic gently)

⚠️ Always wear safety glasses when clipping supports—pieces may fly!

🟥 3. Support Removal Process (FDM)

Step-by-step:

1. Let the print cool completely – warm prints are more prone to damage

2. Snap off loose support blocks by hand where possible

3. Use flush cutters to trim closer areas

4. Apply slight twisting motion to free stubborn supports

5. Use a knife or deburring tool to gently clean up scars or nubs

6. Optional: Light sanding (220–600 grit) to blend surface areas

🧠 Avoid rushing support removal—some parts (especially thin ones) can snap!

🟦 4. Support Removal for Resin Prints

Support removal for SLA/DLP prints requires different handling due to the fragility of uncured resin parts.

Steps:

1. Wear gloves and eye protection

2. Remove supports before curing – parts are flexible and less brittle

3. Use flush cutters or tweezers to gently snip supports at their base

4. Soak in isopropyl alcohol (IPA) to soften any stuck resin

5. Post-cure the model in a UV curing station after support removal

⚠️ Never snap supports off a cured resin print—it may fracture or tear surface details.

🟧 5. Slicer Settings to Improve Support Removal

Adjust these slicer parameters to make supports easier to detach:

🟫 6. Common Mistakes and How to Avoid Them

🟪 7. Finishing After Support Removal

After supports are removed:

• Use fine sandpaper (400–1000 grit) to smooth scarred areas

• Apply primer/filler spray before painting (for aesthetic models)

• Use a soldering iron or hot knife to melt or reshape rough edges (FDM only)

• Clean resin prints with IPA again and let fully cure

🧠 Summary

Removing supports is both a mechanical and artistic process. By understanding your slicer’s support options and using the right tools and techniques, you can maintain the integrity of your model while improving visual and functional quality.

📂 Optional Activities

Assignment:

1. Slice and print a support-heavy model (e.g., overhangs or arms)

2. Record and photograph the support removal process

3. Submit photos and a short reflection:

   • What worked?

   • What would you change in slicer settings next time?

📎 Additional Resources

• Ultimaker: Understanding Supports in Cura

• Chitubox Support Tips – Official Guide

• YouTube: How to Remove Resin Supports Without Damage